Although your SmartClean can be used alone without connecting to the app at all, many useful features can be unlocked by pairing it to your phone to control it via the app. Setting a smart schedule for your vacuum is one of its best and most popular features. Your SmartClean can clean your home while you are away - but be sure to prep the floor surface area,  removing anything the vacuum might get stuck on (e.g blind cords) so it can do a thorough job without getting stuck and need manual rescuing midway!

 

A few things you will need to check before starting:

• Make sure the Data Roaming Access is turned on in your Phone 

• Make sure the Wi-Fi in your home is currently working.  

• Is your home Wi-Fi  2.4ghz? (If you are not sure you will need to check with your Wi-Fi provider. The vacuum will not connect to 5ghz Wi-Fi.)

• If you have dual Wi-Fi in your home, make sure both are working on the same password.  Be sure nobody in your home has changed the Wi-Fi  password!

• If your router allows you to switch back and forth from 2.4 to 5 on the router itself, make sure it is set at 2.4 for this process.

• Is the power button on lighting up solid blue while on charging dock? If not showing a color on the vacuum, the unit needs to be charged.

 

Step 1:

Start by powering off the vacuum for 5 seconds.

Then power back on. 

 

Step 2:

Open up the Tzumi Smart Home App. This is available for download on the App Store.

The app looks like this:

 

 

Step 3:

  Select the Add Device button in the top right corner of the home screen

 

and select Robotic Vacuums > SmartClean V2 / EVO Genius 

 

Step 4:

Enter your Wi-Fi Information.

Make sure you are using the correct Wi-Fi  password! 

When entering into the App, it will not inform you if the wrong password was entered.

It will continue on as normal but will not connect at the end of the process. 

 

Step 5:

On the following screen where it asks to reset your device, press and hold both sides of the control button, until you hear the vacuum say "Ready for Easy Mode Connection".

If you lift up the hood of the vacuum, you will see a blue indicator light labelled Wi-Fi, this light should be blinking rapidly.

 

 

If it is, check off the box on the page that "WiFi indicator light is blinking rapidly" and the Next button will light up. Click it.

The App will transition into an "adding device page", where it should connect within a minute.